Durahub Original Installation Instructions > Step 7 Video

DURAHUB ORIGINAL INSTALLATION INSTRUCTIONS : STEP 7 VIDEO

7

Paint the surface of the shaft with grease where the rubber of the rear seal will sit to ensure a lubricated sealing surface. This will reduce the chance of rust on the axle moving to the rear seal area.

Continue with the Step 8 Video or choose from the following step-by-step Durahub Original installation videos:

• « Durahub Original Installation Introduction Video
• « Step 1 Video
• « Step 2 Video
• « Step 3 Video
• « Step 4 Video
• « Step 5 Video
• « Step 6 Video
• Step 8 Video »
• Step 9 Video »
• Durahub Original Removal Video »