Durahub Original Installation Instructions > Step 5 Video

DURAHUB ORIGINAL INSTALLATION INSTRUCTIONS : STEP 5 VIDEO

5

Take AA-80 Emery Tape and tear lengthwise into two pieces. Using one piece per side, linish the axle where the rear seal of the hub will sit until smooth. Repeat on the other axle.

Continue with the Step 6 Video or choose from the following step-by-step Durahub Original installation videos:

• « Durahub Original Installation Introduction Video
• « Step 1 Video
• « Step 2 Video
• « Step 3 Video
• « Step 4 Video
• Step 6 Video »
• Step 7 Video »
• Step 8 Video »
• Step 9 Video »
• Durahub Original Removal Video »